POWDER COATING BOOTHS  
 
 
 
Powder Coating Booths w/ DISPOSABLE Filtration
 

Our Disposable ASHRAE Filtration Booth is a favorite among custom coaters, job shops and manufacturers, while our Continuous-duty, Self-cleaning Pulse Cartridge Booth is the appropriate choice for continuous, full-shift manufacturing production runs. Both types of booths should be considered spray-to-waste.

The Powder Coating Booth series is available in a wide variety of sizes ranging from 6'W-7'H-7'D to 20'W-12'H-50'D. You are assured THE finest industrial coating booths available and include fans, motors, nut and bolt fasteners, filters, detailed drawings and instructions, all included in one single shipment.

Our disposable filter powder coating booth series is available with a High-efficiency 3rd Stage Safety Filter for recycling filtered, conditioned air back into the facility, saving on heating and air conditioning costs. Stage I blanket-type filters, stage II bag-type filters are standard.

 
 

 
  • Tubeaxial fan,
  • Filters,
  • Complete hardware,
  • Light fixtures,
  • Precise sheetmetal,
  • Sealant.

ALL INCLUDED IN
ONE
COMPLETE SHIPMENT !!!

Use of images from this website is expressly prohibited.

 
 
KOTEmaster offers the highest quality powder coating booths available anywhere.........
at the lowest possible prices.
 
 

All powder coating booths are formed on CNC equipment for true CAD precision !

 

Wall panels and angles feature CNC PRE-PUNCHED bolt holes for easy assembly !

 

All components are CNC formed straight and true for PERFECT alignment.

 

NO hand formed sheetmetal !

 

NUT/BOLT construction with 5/16" fasteners for superior structural integrity !

 
 
  • Features
  • Fan Motors are totally enclosed TEFC, 3-phase 208/230/460 volt. Add explosion proof motor if required by local code..
  • Fans, motors, filters, etc. are packaged, but loose.
  • Not to be used for wet painting.
 
  • Construction
  • 18-Gauge Steel Panels. Nut/bolt construction. Inside of Booth is smooth.
  • Filter Cells are 20” X 20” X 3”
  • Plenum Panels rest on heavy duty 14-Gauge Galvanized Floor Angles.
  • Fans are belt driven with enclosed belt guards. Blades are rigid-type, spark resistant and dielectric
 
 
Powder Coating Booths w/ PULSE-CARTRIDGE Filtration
 
 

Panels
Panels are fabricated from 18-gauge prime quality galvanized steel, flanged and precision punched on 6" centers for maximum rigidity. Panels are fastened together with 5/16 grade 5 bolts and are to be sealed with the provided caulk following assembly.

Illumination
Lighting is provided by Class I Division II, 48" long fluorescent, 32 Watt, T-8 type, four-tube fixture, mounted behind safety glass; appropriately sealed from the interior of the spray booth. All fixtures are UL listed and approved for their intended use and placement.

 
 
PLC Based Purge Control
This feature assures the safe operation of the coating enclosure, by maintaining the airflow at design levels. During operation overspray powder accumulates on the cartridge filters. As the cartridge filters load, airflow decreases and the negative pressure rises within the air handler. A timer activates a system of air purging valves that clear the cartridge filters of the accumulated powder to ensure maximum filter life.
 
 
 
  • Control Equipment
  • NEMA 12 remote electrical panel
  • Primary disconnect
  • Automatic purge/pulse control
  • Main air line disconnect
  • Photohelic pressure gauge
  • Collector Module
  • Factory assembled painted mild steel construction - insulation installed for sound attenuation
  • Spark-proof plug type fan
  • Pulse valves and solenoids
  • Primary filter module: cartridge type
  • Final filters: HEPA type filters 24" x 24" x 12"
  • Removable powder drawer
 
 

RECLAIM Powder Coating Booths for SMALL PARTS
w/ CARTRIDGE Filtration

 
  • Features
  • FLUIDIZED BED RECLAIM
  • Streamlined modular design.
  • Extremely quiet - less that 78 DBA.
  • Top final filter discharge environmentally friendly.
  • Easy-to-change airtight cartridge filters.
  • Compact plenum design offers larger work area.
  • Locking caster base.
  • Fork truck tubes for transfer.

 

  • Control Equipment
  • PLC controlled
  • On demand adjustable pulsing
  • Quick clean/purge mode
  • Manual pulse off switch
  • Circuit breaker protection
  • 120volt interlocked plug for power supply
 

Parts Powder Booth w/ Rolling Caster Base

 
 

Base Assembly
The rollaway base assembly cabinet and floor support is fabricated with 3" channel steel and formed 10-gauge mild steel (welded construction). the finish will be white powder coating.

Illumination
Lighting is provided by Class I Division II, 48" long fluorescent, 32 Watt, T-8 type, four-tube fixture, mounted behind safety glass; appropriately sealed from the interior of the spray booth. All fixtures are UL listed and approved for their intended use and placement.

PLC Based Purge Control
This feature assures the safe operation of the coating enclosure, by maintaining the airflow at design levels. During operation overspray powder accumulates on the cartridge filters. As the cartridge filters load, airflow decreases and the negative pressure rises within the air handler. A timer activates a system of air purging valves that clear the cartridge filters of the accumulated powder to ensure maximum flitter life.

 
 
For additional information on auto spray booths visit http://www.koteprospraybooths.com

Copyright 2000-2014
All Rights Reserved Worldwide

powder coating booths for sale