|
ELECTRIC POWDER COATING OVENS
3W-3H-3D through 6W-6H-12D (internal dimensions)
|
|
|
|
| (Ready to SHIP NOW! 464 220V/Single phase) |
|
| |
The Electric Powder Coating Oven Series is the cost-effective choice
for startup companies and companies requiring batch oven processing of
powder coated parts. The 3-3-3 through 6-6-12 Batch Ovens
features double doors as standard with 3" of high density thermofiber
insulation and rapidly reaches a maximum
operating temperature of 500 F. All Electric Batch Ovens are completely wired and tested. Take
a few minutes and compare the engineering, quality of materials and
workmanship to that of other brands. We
think you will appreciate the difference. |
| |
| |
- Rated INDUSTRIAL Heavy Duty
- All electric batch oven models are MODULAR and EXPANDABLE
- Standard 3W-3H-3D through 6W-6H-12D
- Use hanging bars, your own rolling racks or optional sliding trays.
|
|
| |
|
| 3W-3H-3D ELECTRIC POWDER COATING OVENS |
| |
| The Model 333 Electric Powder Coating Oven features double doors as standard with 3" of high density thermofiber
insulation. It
is rated at an efficient 9 kW and rapidly reaches a maximum
operating temperature of 500 F. The Model 333 Batch Oven is completely wired and tested. |
| |
|
|
|
Model 3W-3H-3D ID Electric Batch Oven
|
|
Shown with optional stand
|
|
| |
| |
Temperature Range
• Ambient +5°F to 500°F
Applications
• Curing, mold preheat, drying, aging
Dimensions
• Internal: 36”w x 36” D x 36” H
• external: 65” w x 48” H x 64” D
Exterior
• Painted slate gray
Interior
• Aluminized steel
Circulation System
• OPTIONAL 1200cfm horizontal airflow
• TEFC direct drive |
|
Door
• Double door, pressure relief latches
Heating System
• 9 KW, seamless tubular elements
• controlled by solid state relay
Safety
• Over temperature protection-High limit
Electrical
• 575/480/460/240/230/220/208 V, single or 3phase
• High limit for safety
Control Panel
• Main power switch
• heat on/off switch
• single set point temperature controller with timing function
Options
• Stand, disconnect box, shelving, forced exhaust, recorder |
|
| |
| |
| |
| 4W-6H-4D, 4W-6H-8D and 4W-6H-12D ELECTRIC POWDER COATING OVENS |
|
|
| The
Model 4W-6H-4D, 4W-6H-8D and 4W-6H-12D Electric Powder Coating Oven Series features double doors as standard with 3" of high density thermofiber
insulation. Each 4 foot deep module is rated at an efficient 15 kW with total heat output at 15, 30 and 45 kW, respectively. Optional higher kW is available. Maximum
operating temperature is 500 F. The Model 4W-6H-4D, 4W-6H-8D and 4W-6H-12D Batch Oven is completely wired and tested. |
| |
| |
|
|
|
|
Model 4W-6H-8D ID Electric Batch Oven
Expandable up to 16 feet
|
|
Model 4W-6H-8D ID Electric Batch Oven
Expandable up to 16 feet
Fully assembled with steel floor
|
|
| |
| |
-
Rated INDUSTRIAL Heavy Duty
-
Features Horizontal EVEN-FLO FORCED AIR Circulation as standard.
-
All electric models are MODULAR and EXPANDABLE
-
Expand to 12 ft
|
|
|
|
| |
|
|
EXAMPLE: 4W-6H-8D ELECTRIC Batch Oven
Dimensions
Standard Model
• Internal (ID): 48” W x 48” D x 72” H
• External (OD): 59” W x 55” D x 95” H
Low
Profile Model (specify at time of order)
• Internal (ID): 48” W x 48” D x 72” H
• External (OD): 74” W x 58” D x 78” H
Doors
• Slam latches
• Double doors to reduce door swing
Heating
System
•30kW total (45kW and 60kW options)
• Seamless Tubular elements
• Controlled by Solid state relay
Electrical
• 575/480/460/240/230/220/208 V, single or 3phase
• High limit for safety
|
|
Exterior
• Painted steel
Interior
• Aluminized Steel
• Steel
plate floor
Circulation
System
• 4,800 cfm total
• Direct drive motor (TEFC)
• Horizontal Airflow
Control
Panel
• Main power switch
• Heat on/off switch
• Single setpoint temperature controller
• Process timer to shut heat off at end of cycle
Options
• Racks and carts
• Disconnect box
• Extension box
•
Pass through configuration (doors on both ends) |
|
| |
Need more
room? No problem! Add a 4 foot deep expansion module with
integral 15kW HEAT and horizontal
air flow to your batch oven for a total of 8 or 12 feet. Don't expand your oven
with an unheated expansion module. Save time, save money,
with a heated expansion module.
Consider
this: Doubling the batch oven volume without
adding an additional heating element will require double the
time to reach the target temperature. Don't
lose hours of valuable daily production time with unheated
expansion modules, waiting while your oven attempts to reach
the target temperature. You
can expand your existing 4 foot deep batch oven to 8 or 12 foot deep without
sacrificing performance. Simply add a 4 foot deep Expansion
Module with integral 15 kW HEAT and horizontal air flow. |
| |
| |
| 6W-6H-4D, 6W-6H-8D and 6W-6H-12D ELECTRIC POWDER COATING OVENS |
|
The Model 6W-6H-4D, 6W-6H-8D and 6W-6H-12D Electric Powder Coating Oven Series features double doors as standard with 3" of high density thermofiber
insulation. Each 4 foot deep module is rated at an efficient 15 kW with total heat output at 15, 30 and 45 kW, respectively. Optional higher kW is available. Maximum
operating temperature is 500 F. The Model 6W-6H-4D, 6W-6H-8D and 6W-6H-12D Electric Powder Coating Oven Series is completely wired and tested. |
| |
| |
-
Rated INDUSTRIAL Heavy Duty
-
Features Horizontal EVEN-FLO FORCED AIR Circulation as standard.
-
All electric models are MODULAR and EXPANDABLE
-
Expandable to 12 ft
- EXAMPLE: 6W-6H-8D
- Each 4 foot
section has 15KW heater.
- 30KW
total front and rear.
- Both
Front and rear section have horizontal airflow.
- Compare
with others!
- Maximum
Temperature: 500F
- Heaters: 30kW total (45kW and 60kW options)
- Recirculation
Air: 4800 CFM total
- 4800 CFM Total
|
|
|
|
|
|
Model
6W-6H-8D ELECTRIC Powder Coating Oven
Expandable up to 16 feet
|
|
| |
| |
EXAMPLE: 6W-6H-8D ELECTRIC
Exterior
• Painted steel
Interior
• Aluminized Steel
• Steel
plate floor
Circulation
System
• 4,800 cfm total
• Direct drive motor (TEFC)
• Horizontal Airflow
Doors
• Slam latches
• Double doors to reduce door swing
Heating
System
•30kW total (45kW and 60kW options)
• Seamless Tubular elements
• Controlled by Solid state relay
|
|
Electrical
• 575/480/460/240/230/220/208 V, single or 3phase
• High limit for safety
Control
Panel
• Main power switch
• Heat on/off switch
• Single setpoint temperature controller
• Process timer to shut heat off at end of cycle
Options
• Racks and carts
• Disconnect box
• Extension box
•
Pass through configuration (doors on both ends)
|
|
| |
| |
